EN ▾
Get API key

Best LLM API Guide

Cheapest LLM API for Coding: Cost per Pull Request

The cheapest LLM API for coding is the one with the lowest cost per accepted change, not the lowest line on a price page. Below are token estimates for common coding tasks, priced at $0.15 per 1M input and $0.50 per 1M output tokens.

Updated:

Stack of code tiles and a branch merging into a main line beside a small coin slot
Isometric coins feeding a stream of token blocks into a server, illustrating free trial credit for an LLM API

Key points

  • Autocomplete is cheap per call but frequent; an agent loop re-reads the codebase and costs far more per task.
  • A reviewed pull request with a 10,000-token prompt costs about $0.0021 at these rates.
  • One agent run of 15 steps, about 375,000 input tokens, costs roughly $0.06.
  • A cheap general model is a good fit for routine work; hard debugging may justify a stronger one.

Coding workloads are mostly input tokens

Code tasks have a lopsided shape. You send a lot of context (the file, the diff, the error, the surrounding modules) and you get back a short patch or a short comment. Input is usually 70 to 95 percent of the tokens, which makes the input price the number that matters most for coding.

At $0.15 per 1M input tokens, a 10,000-token prompt costs $0.0015. At $0.50 per 1M output tokens, a 1,000-token answer costs $0.0005. A coding assistant that reads a lot and writes a little will spend most of its budget on reading. The exception is a full-file rewrite, where output is as large as the file.

This also explains why the price of the output side is easy to overrate in coding. If a tool asks for explanations along with every patch, output grows and the ratio shifts, so decide early whether you want code only or code with reasoning, and set the system prompt to match. A line such as "return only a unified diff" is a free saving.

Four tasks, priced one by one

The numbers below are estimates you can replace with your own. Measure a few real prompts with a tokenizer before you plan a budget.

TaskInputOutputCost per call
Inline autocomplete80060$0.00015
Pull request review10,0001,200$0.0021
Refactor one 8,000-token file8,5008,000$0.005275
Agent run, 15 steps375,00012,000$0.06225

The math for the review row: 10,000 x 0.15 / 1M = $0.0015, plus 1,200 x 0.50 / 1M = $0.0006, total $0.0021. For the refactor: $0.001275 input plus $0.004 output. Note that the refactor spends three quarters of its cost on output, because the model rewrites the whole file.

The agent row is the one to watch. An agent that reads files, runs tests and retries sends the growing context again on every step. Fifteen steps averaging 25,000 input tokens each add up to 375,000 input tokens, which is $0.05625, plus $0.006 for 12,000 output tokens.

What a month looks like for one developer

Assume a developer works 22 days a month and does the following each month: 600 autocomplete calls a day, 40 pull requests reviewed, 40 agent runs and 20 single-file refactors.

  • Autocomplete: 13,200 calls x $0.00015 = $1.98
  • Reviews: 40 x $0.0021 = $0.084
  • Agent runs: 40 x $0.06225 = $2.49
  • Refactors: 20 x $0.005275 = $0.1055

The total is about $4.66 per developer per month. A team of ten lands near $47. Even if your estimates are off by a factor of three, the bill stays under $15 per person. You can use the pricing page to check the rates and the top-up bonuses; a $100 top-up adds 10%, which is $110 of credit.

The weak spot is not the bill, it is the limits. A full key allows 300 requests per minute and 8 concurrent requests. An editor that fires a request on every pause in typing can reach that quickly if a whole team shares one key. Give each person a key or debounce autocomplete.

Wire it into an editor or a script

The API is OpenAI-compatible, so any tool that accepts a custom base URL and key can use it. Many editor extensions and CLI agents have those two settings. Set the base URL to https://api.bestllmapi.com/v1, the model to uncensored and paste your key.

For a script that reviews a diff and prints the cost, use the OpenAI Python SDK:

import subprocess
from openai import OpenAI

client = OpenAI(base_url="https://api.bestllmapi.com/v1", api_key="YOUR_KEY")
diff = subprocess.run(["git", "diff", "main...HEAD"], capture_output=True, text=True).stdout

resp = client.chat.completions.create(
    model="uncensored",
    messages=[
        {"role": "system", "content": "You are a strict code reviewer. List bugs first, then style notes."},
        {"role": "user", "content": diff},
    ],
    temperature=0.2,
)
print(resp.choices[0].message.content)
u = resp.usage
print("cost: $%.6f" % (u.prompt_tokens * 0.15 / 1e6 + u.completion_tokens * 0.50 / 1e6))

Keep temperature low for review and refactor work. The API docs list the parameters that are passed through, including seed, which helps when you want repeatable output in CI.

Ways to keep the coding bill low

  • Send diffs, not whole repositories. The review above uses 10,000 tokens because it sends a diff plus some context.
  • Cap agent steps. A loop that never stops is the most common cause of surprise bills. Stop after a fixed number of steps.
  • Trim tool output. A test log with 5,000 lines is pasted into every later step. Keep the failing lines only.
  • Ask for patches. Requesting a unified diff instead of the full file cuts output in the refactor example by roughly 90 percent when the change is small.
  • Use JSON mode for structured output. response_format with json_object avoids retry loops caused by malformed replies.

Failed or refused requests are not charged, so a request that errors out costs nothing.

When a cheaper model is not the right pick

This is one general open-weight model tuned to answer without content refusals for lawful adult use. It is not a specialist coding model, and it is not the official API of any vendor. For routine tasks such as boilerplate, tests, docstrings, small refactors and review comments, it is a sensible low-cost option. For deep debugging in an unfamiliar codebase or a large architectural change, a stronger model may save you more in developer time than it costs in tokens.

The way to decide is to run 20 real tasks from your backlog through each candidate, count the patches you would merge, and divide spend by that count. A $0.50 trial credit, claimed on the API key page after sign-up, covers a few hundred reviews at the rates above, which is plenty for that test. Other providers set their own prices, so check their current pricing. For setup basics, see how to use an LLM API.

Questions to ask about any free tier

Free offers differ a lot, and the headline rarely tells you what matters. Before you build on one, ask these questions, and find the answers in the provider's own documentation.

  • Which model is it? Some free tiers use a smaller model than the paid one. A test on a weak model tells you little about production.
  • What are the rate limits? A limit of a few requests per minute is fine for a script and useless for a chat app with several users.
  • Does it expire? A one-time allowance with a deadline is a different thing from a recurring monthly one.
  • What happens to your prompts? If the data is used for training, do not paste anything private into it. Here, prompts are not used for training.
  • What does the paid path look like? Moving from free to paid should be a change of account state, not a rewrite.

Self-hosting an open-weight model is sometimes suggested as the free route. The software may cost nothing, but the GPU you need to run a capable model does, whether you rent it by the hour or buy it. For a small project the arithmetic usually favours paying per token, because you pay only for what you use and nothing while idle.

Reading the trial as a test budget

It helps to treat the trial as a test budget rather than a free product. Spend it in a fixed order: first a handful of plain requests to confirm the connection, then your real prompt on ten varied inputs, then a streaming run, then one deliberately large prompt to see how the model handles long context. Keep the numbers from the usage block in a note.

After that you know your average input size, your average output size and your real cost per task. Multiply by the traffic you expect and you have a monthly figure that rests on measurements, not guesses. If the figure is acceptable, a $20 top-up is the next step. If not, you learned that for a few cents.

After the trial: what paying looks like

When the trial runs out or expires, you add prepaid credit. Any whole amount from $20 to $500 works. Larger top-ups carry a bonus: +5% from $50, +10% from $100, +15% from $200. A $100 top-up becomes $110 of credit, and $200 becomes $230.

You can pay by crypto (USDT on TRC20, USDC on Base). There is no subscription and no monthly minimum. The credit never expires, so a $20 top-up that you use slowly is not wasted. Each response includes an X-Balance-USD header, which lets your own code watch the balance without a dashboard.

Failed or refused requests are not charged. If a request errors out, you do not pay for it. Prompts are not used for training. See pricing for the full table.

Cheap ways to make credit last

You do not need tricks, only a few habits.

  1. Trim history. Keep the last N turns plus a short summary of older ones instead of resending everything.
  2. Set a max_tokens ceiling on tasks where short answers are enough. It is optional here, but it caps the output side, which is the more expensive one per token.
  3. Use JSON mode (response_format with json_object) for extraction tasks so you do not pay for chatty preambles.
  4. Test with small inputs first. Prove the prompt on ten examples before you run ten thousand.
  5. Handle 429s with backoff. Retrying in a tight loop on a trial key (2 concurrent, 60 per minute) wastes your own time. Wait for the Retry-After header when it is there.

If you are comparing options before spending anything, the page on Hugging Face Inference API versus this endpoint covers a related decision.

A first call to spend the trial on

Here is a minimal request. Replace the key with the one from your dashboard.

curl https://api.bestllmapi.com/v1/chat/completions \
  -H "Authorization: Bearer YOUR_KEY" \
  -H "Content-Type: application/json" \
  -d '{"model": "uncensored", "messages": [{"role": "user", "content": "Say hello in five words."}]}'

The response includes a usage block with prompt and completion token counts. Multiply those by the prices above and you have the exact cost of the call. Do that a few times and you will develop a feel for your own workload, which is worth more than any estimate. The quickstart docs cover streaming, tools and error codes.

Questions and answers

How many tokens does a typical code review use?

A diff plus some surrounding context is often 5,000 to 15,000 input tokens, and the review comment is 500 to 1,500 output tokens. At these rates that is roughly $0.001 to $0.003.

Can I use this API in my editor?

Yes, if the editor or extension lets you set a custom OpenAI-compatible base URL and key. Use the base URL from your account, the model name uncensored and your API key.

Is the context window big enough for large files?

The window is 100,000 tokens, shared by the prompt and the completion. That fits many files at once, but very large repositories still need to be split.

Do I need a card to try it?

No. New users can claim $0.50 of trial credit with one click on the API key page, with no card, valid for 7 days.

Your key is one form away

Create an account, copy the key, change the base URL. That is the whole setup.

Get API key